Salt Lake City / Glendale

Heat pump installation in Glendale, UT - rebates, sizing and local data

Glendale in Kane County

Glendale has 493 residents (give or take 227) (ACS 2020-2024 5-year, table B01003, https://data.census.gov/table/ACSDT5Y2024.B01003?g=160XX00US4929360, checked 2026-10-19), about 70 people per square mile.

Glendale is about 241 miles from the Census center point for Salt Lake City in a straight line and covers 6.996 square miles of land (Census 2024 Gazetteer internal points and land area, https://www2.census.gov/geo/docs/maps-data/data/gazetteer/2024_Gazetteer/, checked 2026-10-19).

Housing stock

Glendale has 203 housing units, 8% built before 1940 and 47% before 1980, with 31% built in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US4929360, checked 2026-10-19).

Glendale has 4 points more pre-1940 homes than Kane County as a whole (4%) and 6 points fewer homes built after 2000 than the county's 37% (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=050XX00US49025, checked 2026-10-19). An older stock means more insulation upgrades before the heat pump goes in.

The median Glendale home was built in 1983 (ACS 2020-2024 5-year, table B25035, https://data.census.gov/table/ACSDT5Y2024.B25035?g=160XX00US4929360, checked 2026-10-19) and the median home has 5.6 rooms (ACS 2020-2024 5-year, table B25018, https://data.census.gov/table/ACSDT5Y2024.B25018?g=160XX00US4929360, checked 2026-10-19).

95% of Glendale homes are single-family detached, 0% are in two- to four-unit buildings and 0% are in buildings of five or more units (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=160XX00US4929360, checked 2026-10-19).

With 95% detached houses and 0% in small multi-family buildings, a Glendale quote is usually one or two outdoor units with ducted or ductless heads sized room by room.

Glendale has 11 points more detached houses than Kane County overall (84%) (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=050XX00US49025, checked 2026-10-19).

Rebate path

No electric utility is on file for Glendale on this door yet, so this page does not name one; the name on the bill decides which rebate path applies.

Median household income in Glendale is $50,625 (ACS 2020-2024 5-year, table B19013, https://data.census.gov/table/ACSDT5Y2024.B19013?g=160XX00US4929360, checked 2026-10-19); many state and utility heat pump rebate programs set higher incentive tiers for income-qualifying households, so the household income on the application, not the town median, decides which level applies.

Cold-day number

Heating design temperature: -4F. Source: ENERGY STAR Design Temperature Limit Reference Guide (2019 Edition), Kane County row, 99% heating, PDF pages 125 to 127 of 141 (Revised 11/11/2020), https://www.energystar.gov/sites/default/files/Design%20Temperature%20Limit%20Reference%20Guide%20(2019%20Ed)%20-%20ENERGY%20STAR%20Single-Family%20New%20Homes_Rev11.pdf, fetched 2026-10-19, 99%.

That -4F figure is the Kane County cold-day number a Glendale heat pump is sized against, so ask the installer to show the system's heating output at -4F, not at the milder rating-label temperature.

Next step

Ask for the heat-loss calculation room by room; the median Glendale home has 5.6 rooms and was built around 1983, and the count of heads and the tonnage follow the rooms and the insulation, not the square footage.

The form on this page is the follow-up for Glendale. The public number is the number the contractor quotes from.

No local contractor is named on this door for Glendale yet. A request from this page goes to the first licensed shop that takes the door.

Where should the follow-up go?

We will follow up by email. No calls.

No spam, no sold information. One follow-up about exactly this request.